8 Best Floor Jacks for Trucks and SUVs (November 2026)
The best floor jacks for trucks and SUVs include the BIG RED Trolley Floor Jack with Extra Saddle for higher trucks, the AV Steel 3 Ton Single Piston Floor Jack for standard pickup owners, and the AV Steel 4 Ton Heavy-Duty Floor Jack for frequent garage work.
On this page (8 sections)
- Which floor jack is best for trucks and SUVs?
- The best floor jacks for trucks and SUVs
- How do you choose the best floor jack for trucks?
- How should you set up a truck floor jack before the first lift?
- What safety steps matter when lifting a truck?
- Which mistakes make a truck jack a poor choice?
- How do you care for a floor jack between jobs?
- Which truck floor jack should you choose?
The BIG RED Trolley Floor Jack with Extra Saddle is the best floor jack for trucks with higher approved lifting points, as long as its capacity and reach match the vehicle. Its extended saddle neck makes it the first option to check for that job.
For standard pickups, the AV Steel 3 Ton offers a clear vehicle match. For tight entry clearance, start with the LARBANKE Dual Piston or Yellow Jacket 3 Ton.
Choose around the actual lifting point and task, rather than the truck badge alone. A jack that fits beneath the frame may still run out of travel before the tire clears the floor.
Our guide to choosing the right floor jack size covers capacity and height checks. You can also compare these picks with our best 3 ton floor jacks and best low profile floor jacks.
Our picks at a glance
-
1
Best for higher trucksBIG RED Trolley Floor Jack with Extra Saddle
9.0/10 our score
See it on Amazon -
2
Best for standard pickup ownersAV Steel 3 Ton Single Piston Floor Jack
8.1/10 our score
See it on Amazon -
3
Best for frequent garage workAV Steel 4 Ton Heavy-Duty Floor Jack
7.9/10 our score
See it on Amazon
- 4
Check itYellow Jacket 3 Ton Aluminum and Steel Floor Jack
Best for mixed vehicle garages - 5
Check itLARBANKE 3 Ton Dual Piston Floor Jack
Best for very low trucks - 6
Check itYellow Jacket 2.5 Ton Aluminum and Steel Floor Jack
Best for lighter SUVs - 7
Check itBonnlo 3 Ton Low Profile Floor Jack
Best for low-clearance SUVs - 8
Check itLARBANKE 3 Ton Floor Jack with 18 Inch Lift
Best for lower lift points
Which floor jack is best for trucks and SUVs?
The BIG RED leads for higher lifting points, while the AV Steel 3 Ton is a strong starting point for standard pickup owners. Low-clearance vehicles need a separate check of entry height and underbody access.
We compared capacity, lift range, construction, pump design and stated vehicle limits. The order favors truck suitability, so a lower-ranked jack can still be the better choice for your particular garage.
The AV Steel 4 Ton offers the most rated capacity here, but it excludes several vehicle types. The Bonnlo offers a useful low-to-high range for SUVs, while its pickup suitability needs confirmation.
| Product | Best for | Capacity | Lift range | Weight | Our score |
|---|---|---|---|---|---|
| BIG RED Trolley Floor Jack with Extra Saddle | higher trucks | 3 ton (6,000 lb) | 5-7/8 to 20-7/8 in | 36 lb | 9.0 |
| AV Steel 3 Ton Single Piston Floor Jack | standard pickup owners | 3 ton (6,000 lb) | 5.5 to 18.5 in | About 64 lb | 8.1 |
| AV Steel 4 Ton Heavy-Duty Floor Jack | frequent garage work | 4 ton (8,000 lb) | 87.3 lb | 7.9 | |
| Yellow Jacket 3 Ton Aluminum and Steel Floor Jack | mixed vehicle garages | 3 ton | 3-15/16 to 18-5/16 in | 58.6 lb | 7.6 |
| LARBANKE 3 Ton Dual Piston Floor Jack | very low trucks | 3 ton | 2.87 to 19.69 in | 70 lb | 7.1 |
| Yellow Jacket 2.5 Ton Aluminum and Steel Floor Jack | lighter SUVs | 2.5 ton | 3-15/16 to 18-5/16 in | 56.9 lb | 7.1 |
| Bonnlo 3 Ton Low Profile Floor Jack | low-clearance SUVs | 3 ton | 2.95 to 20.1 in | 70.5 lb | 6.9 |
| LARBANKE 3 Ton Floor Jack with 18 Inch Lift | lower lift points | 3 ton | 5.31 to 18.11 in | 20.5 kg | 6.7 |
The best floor jacks for trucks and SUVs
Choose the first jack that meets every requirement, rather than buying the largest capacity or lowest saddle by itself. These picks have different strengths in reach, entry clearance, handling and vehicle fit.
BIG RED Trolley Floor Jack with Extra Saddle: Best for higher trucks
- 3 ton (6,000 lb) capacity
- 5-7/8 to 20-7/8 in lift range
- Extra long saddle neck
- Steel construction
The extended saddle neck and tall maximum lift make this the first option to check for higher trucks and SUVs. Skip it when clearance beneath the approved lift point is tight.
Pros
- Extra long saddle neck for higher vehicles
- Highest maximum lift in this group
- Carrying handle for moving between storage and work
Cons
- Higher starting height than the low-profile picks
- Single piston pump
The BIG RED T83006 suits truck and SUV owners whose approved lifting points sit higher off the ground. Its extra long saddle neck helps close that initial gap, while the 5-7/8 to 20-7/8 in range gives it the tallest maximum lift here.
It pairs a 3 ton capacity with a single piston quick lift pump. Steel construction, 4 casters and a carrying handle make it a practical option to compare if you move the jack between storage and the driveway.
At 36 lb, it's lighter than the other picks with stated weights. That matters when you must carry a jack over a threshold rather than roll it along a clear floor.
Skip it if a low running board, underbody panel or lifting point blocks entry. Its extra saddle height also doesn't make it an automatic choice for a lifted truck; the truck's instructions must still permit the setup.
AV Steel 3 Ton Single Piston Floor Jack: Best for standard pickup owners
- 3 ton capacity
- 5.5 to 18.5 in lift range
- Single piston pump
- Not for lifted or heavy-duty trucks
A direct match to consider for routine work on standard pickups with suitable lift points. AV Steel excludes lifted vehicles, heavy-duty trucks and RVs.
Pros
- Designed for standard pickups
- Rotatable saddle for alignment
- Overload safety valve
Cons
- Not for lifted or heavy-duty trucks
- Heavy to carry at about 64 lb
The AV Steel 3 Ton Single Piston Floor Jack suits standard pickup owners doing occasional garage work. Its 5.5 to 18.5 in range is worth checking for tire and brake jobs where the approved point is accessible.
AV Steel excludes lifted vehicles, heavy-duty trucks and RVs. Those limits are a firm reason to skip this model, even if the capacity number looks adequate for part of the vehicle.
The rotatable saddle helps with alignment, and rear rotating wheels allow repositioning. Its single piston pump is a reasonable choice when fewer handle strokes aren't your main concern.
At about 64 lb, this is better suited to a garage storage spot than frequent carrying. AV Steel backs it with a 12-month warranty and says it meets ANSI/ASME PASE safety standards, but correct setup remains the user's responsibility.
Choose it for a compatible stock pickup rather than as a catch-all jack for a changing fleet.
AV Steel 4 Ton Heavy-Duty Floor Jack: Best for frequent garage work
- 4 ton (8,000 lb) capacity
- Dual piston pump
- 19-3/4 in maximum lift
- Not for lifted or heavy commercial trucks
The highest rated capacity here pairs with a dual piston pump for frequent garage lifting. Confirm the conflicting minimum-height figures before choosing it for tight clearance.
Pros
- Highest rated capacity in this group
- Dual piston pump reduces handle strokes
- Overload safety valve
Cons
- Heavy at 87.3 lb
- Conflicting minimum-height figures need confirmation
- Excludes lifted and heavy commercial trucks
The AV Steel 4 Ton Heavy-Duty Floor Jack suits a garage that needs more rated capacity and frequent lifting. Its dual piston pump reduces handle strokes compared with a single piston design, which is useful when positioning and raising vehicles often.
The 4 ton rating is the highest here, and maximum lift reaches 19-3/4 in. Its 87.3 lb weight makes a clear rolling route and a nearby storage space worth planning before buying.
Confirm minimum height with AV Steel: the brand gives conflicting figures of 4-1/4 and 8.05 in. That difference can decide whether the jack fits beneath your vehicle.
Despite the name, AV Steel excludes lifted vehicles, heavy commercial trucks, sports cars and RVs. Buy it for a compatible standard truck or SUV that calls for the added capacity.
Skip it if you need a jack to carry between locations, or if tight clearance remains unresolved.
Yellow Jacket 3 Ton Aluminum and Steel Floor Jack: Best for mixed vehicle garages
- 3 ton capacity
- 3-15/16 in minimum height
- Dual pump
- Aluminum and steel construction
A low starting height suits garages that serve both cars and compatible trucks. Its lower maximum lift makes checking truck lift-point height especially useful.
Pros
- Low entry height
- Dual pump
- Rubber saddle and foam handle bumper
Cons
- Less maximum lift than several other picks
- Still substantial to carry at 58.6 lb
The Yellow Jacket 3 Ton Aluminum and Steel Floor Jack suits a garage shared by cars and compatible trucks. Its 3-15/16 in minimum height helps with lower lifting points, while the dual pump cuts down on pumping compared with a single pump.
Its maximum lift is 18-5/16 in, so check the truck end of that mixed garage carefully. Easy entry beneath a car doesn't mean enough height remains to get a truck tire off the floor.
The rubber saddle and foam handle bumper help protect contact areas from bare metal. A side handle helps with positioning, though the 58.6 lb weight still calls for care when carrying it.
Choose this when both vehicles fit its working range and the lower entry matters. Skip it for a higher truck that needs more travel.
For clearance guidance, see what a low-profile floor jack is.
LARBANKE 3 Ton Dual Piston Floor Jack: Best for very low trucks
- 3 ton capacity
- 2.87 to 19.69 in lift range
- Dual piston pump
- Four-wheel design
The lowest entry height in this group helps with tight access beneath approved lift points. A removable handle also helps when storing the jack in a garage.
Pros
- Lowest minimum height in this group
- Dual piston pump
- Removable handle and replaceable saddle
Cons
- Heavy to carry at 70 lb
- Low entry height doesn't confirm reach beneath the vehicle
The LARBANKE 3 Ton Dual Piston Floor Jack is the first option to compare when entry clearance is the main obstacle. Its 2.87 in minimum height is the lowest here, paired with a 19.69 in maximum lift.
That range makes it useful to consider for a low truck or a garage serving different vehicle heights. Still, check the jack body's path beneath the vehicle, since a low saddle can't pass through an obstruction farther back.
The dual piston pump, rubber saddle and foam handle bumpers suit routine garage use. Its removable, replaceable saddle offers a serviceable contact part, but replacement parts must match the jack's instructions.
The handle also comes off for storage. That helps reduce storage height without making the 70 lb carbon steel jack easier to carry.
Skip it if your storage plan involves frequent lifting onto a shelf or into a vehicle. Choose it for clearance and range, not portability.
Yellow Jacket 2.5 Ton Aluminum and Steel Floor Jack: Best for lighter SUVs
- 2.5 ton capacity
- 3-15/16 in minimum height
- Dual pump
- Aluminum and steel construction
Consider this for a lighter SUV whose lifting requirements fit its lower capacity. It saves little weight compared with the 3 ton Yellow Jacket, so capacity should decide between them.
Pros
- Low entry height
- Dual pump
- Rubber saddle and foam handle bumper
Cons
- Lowest rated capacity in this group
- Only a small weight saving over the 3 ton Yellow Jacket
The Yellow Jacket 2.5 Ton Aluminum and Steel Floor Jack is a candidate for lighter SUVs with confirmed lifting requirements. Its lower capacity is the main reason to be selective.
It shares the 3-15/16 to 18-5/16 in lift range of the larger Yellow Jacket here. A dual pump, rubber saddle and foam handle bumper cover the main handling and contact features.
At 56.9 lb, it saves only a small amount of weight over that 3 ton alternative. Don't give up needed capacity for that modest difference, especially if you expect to change vehicles.
Choose it when the SUV's approved lifting setup falls within its rating and you have no need for the larger model's capacity. Skip it when vehicle weight or the intended lifting load is uncertain.
Some capacity figures use different ton and pound pairings, so follow the rating and instructions marked on the actual jack.
Bonnlo 3 Ton Low Profile Floor Jack: Best for low-clearance SUVs
- 3 ton capacity
- 2.95 to 20.1 in lift range
- Dual pump
- Steel construction
Low entry and a maximum lift above 20 in make this worth comparing for compatible SUVs. Pickup owners should confirm suitability with Bonnlo before choosing it.
Pros
- Combines low entry with a tall maximum lift
- Dual pump
- Swivel casters for positioning
Cons
- Heavy at 70.5 lb
- Pickup suitability needs confirmation
The Bonnlo 3 Ton Low Profile Floor Jack is worth comparing for SUVs needing low entry and a taller finish. Its 2.95 to 20.1 in range combines access beneath lower points with more maximum height than several other low-profile picks.
Bonnlo names SUVs, sedans and vans among compatible vehicle types. Pickup owners should confirm suitability with Bonnlo before choosing it, rather than treating the broad capacity rating as approval.
The dual pump helps reduce pumping, and swivel casters assist positioning on a suitable garage floor. Plan storage around its 70.5 lb steel construction.
Choose it when an SUV's approved lift point needs that combination of entry clearance and travel. Skip it if you mainly need a jack to carry between sites.
For a pickup, resolve vehicle fit first; the attractive height range is useful only after that question is settled.
LARBANKE 3 Ton Floor Jack with 18 Inch Lift: Best for lower lift points
- 3 ton capacity
- 5.31 to 18.11 in lift range
- Carbon steel construction
- Four casters
This shorter-lift option suits vehicles whose approved lifting points fall comfortably within its range. LARBANKE describes it for cars, so confirm truck suitability before buying.
Pros
- Carbon steel construction
- Four casters for positioning
- Large 4.65 in saddle
Cons
- Lowest maximum lift in this group
- Truck suitability needs confirmation
The LARBANKE 3 Ton Floor Jack with 18 Inch Lift fits a narrower role: vehicles with accessible, lower lifting points that don't require tall travel. Its 5.31 to 18.11 in range gives it the lowest maximum lift in this group.
LARBANKE describes this model for cars. Confirm truck suitability before buying, and skip it when you need a straightforward recommendation for a higher pickup.
The carbon steel body rides on 2 large steel casters and 2 swivel casters. A 4.65 in saddle gives a broad contact surface, but the saddle must still match the shape and location of the approved lift point.
At 20.5 kg, it remains a substantial tool to carry. Consider it only after resolving fit and height, rather than choosing it because it shares a capacity rating with more truck-focused options.
A larger saddle can't make an unsuitable contact point safe.
How do you choose the best floor jack for trucks?
Match capacity, entry clearance, reach and usable lift height to the truck's approved lifting method. A jack must pass all 4 checks before pump speed or storage convenience matters.
Write down your vehicle's lifting instructions before comparing models. Our guide to which floor jack to buy can help you turn those requirements into a shortlist.
What capacity should a truck floor jack have?
Choose the rated capacity required for the planned lift, using the truck and jack manuals. Don't assume lifting one end always places exactly half the vehicle's weight on the saddle.
Engines, cargo and vehicle layout affect weight distribution. A vehicle's weight label also doesn't tell you which central lifting points are approved.
Avoid choosing right at an uncertain load limit. If you can't confirm the required capacity or lifting method, get guidance from the vehicle manufacturer or a qualified repair shop before buying equipment.
A higher-capacity jack still needs the right height and contact arrangement. The AV Steel 4 Ton's vehicle exclusions show why capacity alone can't settle the choice.
How much height does a truck floor jack need?
The jack needs enough usable travel after saddle contact to complete the job. Maximum saddle height alone doesn't describe how far the vehicle will rise.
Measure from the floor to the approved lifting point while the truck sits normally. Then account for the movement needed to place stands and complete the task.
When lifting from an approved frame point, suspension droop can consume travel before the tire leaves the ground. A replacement tire may also need more clearance than a deflated tire requires for removal.
For modified trucks, don't guess from tire size or suspension lift alone. Changes can affect access and the lifting procedure, so use instructions that apply to the current setup.
Will a low-profile floor jack fit beneath a truck?
A low-profile jack fits only if the whole approach path stays clear, not just the saddle's leading edge. Running boards, skid plates and other parts may block access to an approved point.
Check the available opening, the point's distance beneath the vehicle and space for the handle. Leave enough room to pump without forcing the handle against the bodywork.
Minimum height matters more after a flat tire reduces clearance. If roadside use is your goal, also check the truck's emergency lifting instructions rather than assuming a garage jack replaces its specified equipment.
Our low-profile jack guide explains the difference between a low entry point and useful reach.
Which pump and construction suit your garage?
Choose a dual pump for frequent lifting and prioritize manageable weight if the jack must be carried. Single piston models remain useful when occasional work makes pumping speed less important.
Aluminum and steel construction doesn't automatically mean easy carrying. Compare actual weight and handles, and decide whether your route allows rolling from storage to the work area.
A removable handle can help a jack fit under a bench. It doesn't reduce the weight you must lift over a step.
Also check space around the truck with the garage door closed. A jack may fit in storage yet leave too little room to swing its handle during use.
How should you set up a truck floor jack before the first lift?
Start with both manuals, a clear floor and a full inspection. Handle assembly, air bleeding and hydraulic-fluid checks vary by model, so follow the jack's specific instructions.
Look for leaking fluid, bent parts, cracked wheels, loose fasteners and damage to the saddle. Don't use a jack with damage or an unexplained lifting fault.
If the manual calls for bleeding before use, follow its exact sequence. Run the jack through the required unloaded checks and confirm that the release control works smoothly before positioning it under the truck.
Close the release valve as directed without forcing it. An incompletely closed valve can prevent lifting, while extra force isn't a repair for a jack that won't hold.
Prepare the stands, wheel chocks and tools before raising anything. You shouldn't need to search for support equipment while the truck is suspended.
What safety steps matter when lifting a truck?
Use approved lifting and support points on firm, level ground, and keep everyone clear of the vehicle's underside until it rests securely on stands. A floor jack raises the truck; stands support it during work.
Follow the vehicle manual for transmission position, parking brake and wheel chocking. If wheel fasteners must be loosened before lifting, do that while the vehicle remains on the ground as instructed.
Position the saddle squarely at the approved point. Raise slowly and watch the contact area from a safe position, stopping if the saddle shifts or the vehicle starts to move unexpectedly.
A floor jack may need to roll slightly as its lifting arm moves. Keep its wheel path clear instead of wedging the jack in place.
Place properly rated stands at approved support points, then lower onto them slowly. Check support as both manuals direct before starting work, and don't move the vehicle while it's raised.
Plan the stand arrangement in advance with our guide to how many jack stands you need.
Which mistakes make a truck jack a poor choice?
The biggest mistakes are buying for capacity alone, ignoring suspension travel and trying to improvise missing height. Fix the equipment choice before beginning the lift.
Don't stack loose wood, bricks or pads on the saddle. Use an adapter or extension only when approved for that jack and lifting setup.
Don't treat a differential, axle tube or suspension part as a lifting point just because it looks strong. The vehicle manual decides where the load can safely go.
Avoid gravel, sloped driveways and soft surfaces that prevent stable support or proper wheel movement. These floor jacks aren't a reason to improvise a workshop on unsuitable ground.
An overload valve also doesn't make excessive loads acceptable. Stop if the jack won't raise the vehicle normally, and identify the cause rather than pumping harder.
How do you care for a floor jack between jobs?
Keep the jack clean, dry and maintained according to its manual, with regular checks for leaks and wheel damage. Good storage also keeps grit away from moving parts.
Wipe off dirt and road residue after use. Lubricate only the points named in the instructions, and keep the wheels free of debris that could block movement during a lift.
Store the saddle lowered and the handle secured as directed. Avoid leaving the jack where it can be struck by a vehicle or where moisture can collect around it.
Use only the hydraulic fluid the manufacturer specifies, and don't overfill the reservoir. Our guide to floor jack oil explains fluid choice and why substitutes can cause problems.
If lifting becomes uneven or the saddle drops unexpectedly, stop using the jack. Follow the manual's service guidance rather than opening hydraulic parts without the required knowledge.
Which truck floor jack should you choose?
Choose the BIG RED for higher approved lifting points, the AV Steel 3 Ton for a compatible standard pickup, or the LARBANKE Dual Piston when very low entry clearance decides the choice. Pick the AV Steel 4 Ton when its extra capacity is needed and its vehicle limits fit.
For a mixed car-and-truck garage, compare the Yellow Jacket 3 Ton's access against the truck's required height. The Bonnlo deserves a look for compatible SUVs needing both low entry and a taller finish.
The best floor jack for trucks is the one that completes your approved lift without improvised extensions, uncertain load calculations or blocked access. If any of those checks remain unresolved, use our floor jack size guide before ordering.
Our top 3 picks at a glance
-
1
Best for higher trucks
BIG RED Trolley Floor Jack with Extra Saddle
9.0/10 our score
See it on Amazon -
2
Best for standard pickup owners
AV Steel 3 Ton Single Piston Floor Jack
8.1/10 our score
See it on Amazon -
3
Best for frequent garage work
AV Steel 4 Ton Heavy-Duty Floor Jack
7.9/10 our score
See it on Amazon
Frequently asked questions
What capacity floor jack do I need for a truck?
Choose the rated capacity required by your vehicle's lifting instructions and the jack manual. Don't assume a jack carries exactly half the truck's weight when raising one end, because weight distribution and lift position affect the load.
Capacity, lift height and approved contact points must all suit the planned lift.
Will a 3 ton floor jack lift an SUV?
A 3 ton floor jack can lift an SUV when its rated capacity, reach and height range meet that vehicle's requirements. The SUV label alone doesn't guarantee fit, especially with added cargo or changes to suspension and tires.
Use approved lifting points and properly rated stands before working underneath.
How high should a floor jack lift a truck?
It must reach the approved lift point and raise the truck far enough for the intended task and stand placement. Suspension travel can use part of that movement before a tire leaves the ground.
Measure at the actual lifting point rather than using bumper height or overall ground clearance.
Can I use a floor jack on a lifted truck?
Use a floor jack on a lifted truck only when its manufacturer permits that application and its capacity, reach and height meet the truck's requirements. Both AV Steel models here exclude lifted vehicles.
Don't make up missing height with loose blocks, stacked pads or an unapproved saddle extension.
