9 Best Floor Jacks for an F-150 (November 2026)
The best floor jacks for an F-150 include the DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley for most F-150 owners, the ARCAN 3-Ton Aluminum Low Profile Floor Jack for lifting height, and the BIG RED Trolley Floor Jack with Extra Saddle for lifted trucks.
On this page (4 sections)
The best floor jack for an F-150 for most owners is the DNA Motoring TOOLS-00234, a 2 ton trolley that handles tire rotations, brake pads and oil changes on a stock truck. Pick the BIG RED 3 Ton T83006 if your F-150 is lifted, or the ARCAN 3-Ton Aluminum for a light jack with real reach.
An F-150 is a half-ton pickup, and a corner of one carries about 1,000 to 1,400 lb. That is well inside a 2 ton jack's rating, so capacity is rarely the problem.
The real deciding factors are lift height and how low the jack sits at rest.
A lifted F-150 with 35 in tires sits higher at the frame, and a low jack cannot reach the lift point. A stock truck needs the opposite: a jack that starts low enough to slide under the frame without dragging.
A trolley jack also rolls on casters, so you can line the saddle up with the frame rail or the rear differential before you start pumping.
Think about where the saddle actually lands. Ford's frame rails and the rear differential are the usual lift points, and the differential sits well inboard of the wheels.
A jack with a long reach and a wide saddle gets there without you shoving it under the rocker panel first. A short, low trolley like the DNA Motoring is fine on a stock truck, but on a lifted one you may run out of saddle height before the pad touches steel.
Our floor jacks for trucks guide covers the height math in more detail. If you also lift a car or SUV, the home garage floor jack guide looks at shared-use options.
Our picks at a glance
-
1
Best for most F-150 ownersDNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley
9.7/10 our score
See it on Amazon -
2
Best for lifting heightARCAN 3-Ton Aluminum Low Profile Floor Jack
9.2/10 our score
See it on Amazon -
3
Best for lifted trucksBIG RED Trolley Floor Jack with Extra Saddle
9.0/10 our score
See it on Amazon
- 4
Check itJack Boss 3 Ton Aluminum and Steel Racing Floor Jack
Best for fast lifting - 5
Best for heavy loadsCheck it - 6
Check itMaxority 3 Ton Low Profile Floor Jack
Best for lowered or modified trucks - 7
Check itVEVOR 2.5 Ton Low Profile Heavy-Duty Steel
Best for tight storage - 8
Check itAV Steel 3 Ton Single Piston Floor Jack
Best for standard pickups - 9
Check itARCAN A20003 3 Ton Steel Low Profile Floor Jack
Best for long service life
The best floor jacks for an F-150 at a glance
The DNA Motoring wins on everyday value and weight, while the taller 3 ton jacks earn their place on lifted or heavy trucks. Choose by your truck's ride height first, then by how often you move the jack.
The table below lines up the lift range and pump type of all nine so you can compare at a glance.
DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley: Best for most F-150 owners
- 2 ton (4,000 lb) capacity
- 5.1 in to 13 in lift range
- Swivel casters
- Safety overload valve
A light steel trolley that covers tire changes, brake jobs and oil changes on a standard F-150.
Pros
- Light enough to move around the driveway
- Low 5.1 in start height
- Overload valve built in
Cons
- 13 in top height limits lifted trucks
- DNA Motoring does not recommend it for pickups
The DNA Motoring suits the F-150 owner who changes tires twice a year and does brake work in the driveway. Its 2 ton (4,000 lb) capacity covers a corner of a stock truck with room to spare, and the 5.1 in start height slides under the frame without a ramp.
The overall body measures 10 x 19 x 8 in, so it tucks into a corner of the garage when the work is done.
The lift tops out at 13 in. That reaches the frame on many trucks, but it falls short of the frame height on a lifted F-150.
The large saddle spreads the load and helps protect the lift point, and the alloy steel body keeps the jack steady while you pump. Swivel casters let you steer it into place from any angle.
DNA Motoring warns that the jack is not recommended for pickups because of its 2 ton rating. Check your truck's corner weight before you buy, and keep a pair of jack stands ready for support.
The built-in safety release valve triggers on an overload, so the jack stops lifting rather than straining the pump. It also notes the jack is for vertical lifting only and cannot take side or downward force.
It is the lightest full-size jack here in feel and the easiest to wheel around on its swivel casters. Pick it for routine work on a stock truck.
Skip it if your F-150 runs a lift kit or you tow heavy loads.
ARCAN 3-Ton Aluminum Low Profile Floor Jack: Best for lifting height
- 3 ton (6,000 lb) capacity
- 3.75 in to 18 in lift range
- Aircraft-grade aluminum
- Side-mount handle
A tall, light jack that reaches 18 in and fits under low clearance without straining your back.
Pros
- 18 in top height suits lifted F-150s
- Aluminum body weighs 56 lb
- Reinforced lift arm
Cons
- Aluminum costs more than steel
- Bigger footprint than the DNA Motoring
The ARCAN A20019 suits the owner who wants height without the weight of a steel jack. Its aircraft-grade aluminum body weighs 56 lb, light enough for one person to carry from the shelf to the truck.
The side-mount handle sits on the frame rather than the end, so you can pump from the side when the truck is close to a wall.
It reaches 18 in at the top and starts at 3.75 in. That combination covers a lifted F-150 and still slides under a low car, so one jack can serve the whole driveway.
The reinforced lift arm adds torsion control under load, and bypass and overload valves stop over-extension. The quick-rise design brings the saddle up to the load with fewer strokes before the real lifting begins.
Aluminum costs more than steel, and the jack's footprint is bigger than the DNA Motoring's at 30 x 13.5 x 8 in. The 3 ton rating also means more jack than a stock truck strictly needs.
ARCAN backs it with a 1 year warranty. Pick it if you want reach and light weight in one tool.
Skip it if you only work on a stock truck and want to keep the spend down.
BIG RED Trolley Floor Jack with Extra Saddle: Best for lifted trucks
- 3 ton (6,000 lb) capacity
- 5.88 in to 20.88 in lift range
- Extra long saddle neck
- Single piston pump
The long saddle neck reaches 20.88 in, so lifted F-150s get real clearance without stacking blocks.
Pros
- 20.88 in top height clears lifted trucks
- Light 36 lb steel build
- Swivel casters for easy positioning
Cons
- Single piston pump needs more strokes
- Starts at 5.88 in so low cars need care
The BIG RED T83006 suits lifted F-150s and trucks with oversized tires. Its extra long saddle neck reaches 20.88 in, the highest top height in this group, so you can lift a lifted truck without stacking wood blocks under the jack.
The 24.5 in handle gives you leverage to push the saddle up that extra distance.
The 3 ton (6,000 lb) capacity leaves margin over a corner weight. A single piston quick lift pump raises the saddle to the load fast, and the safety bypass system stops overloading.
Two large steel casters and two swivel casters roll smoothly on a garage floor. A built-in carrying handle lets you lift and move the 36 lb steel body quickly.
The 5.88 in start height is the trade-off: on a very low truck or car, the jack may not slide under without a small ramp. The single piston also means more strokes to reach the top than a dual-pump jack needs.
Pick it if your F-150 runs a lift kit or 35 in tires. Skip it if you also work on lowered vehicles and need a low start height.
Jack Boss 3 Ton Aluminum and Steel Racing Floor Jack: Best for fast lifting
- 3 ton (6,000 lb) capacity
- 3.94 in to 18.31 in lift range
- Dual-piston quick lift
- Rubber saddle
A dual-piston jack that reaches height in fewer strokes, handy when you change all four tires in one session.
Pros
- Dual-piston pump saves strokes
- Low 3.94 in start height
- Factory tested to 1.5X rated capacity
Cons
- Heavier than a pure steel trolley
- 18.31 in top height falls short of the BIG RED
The Jack Boss 3 Ton suits the owner who changes all four tires in one session and wants to spend less time pumping. Its dual-piston pump raises the saddle in fewer strokes than a single piston design, so a full rotation goes faster.
The rubber saddle grips the lift point and protects the frame coating from scratches.
The lift range runs from 3.94 in to 18.31 in. That low start clears the frame on a stock F-150, and the top height covers a mild lift.
The body measures 28.3 x 13.7 x 7.8 in and weighs 58.5 lb, so it rolls easily but takes both hands to lift onto a shelf. The two-piece handle makes it easier to carry and to store.
The aluminum and steel body is lighter than a pure steel jack. Jack Boss factory tests each jack to 1.5X its rated capacity and meets ANSI/ASME PASE standards.
The 3 ton rating works out to 6,000 lb here, matching the other 3 ton jacks in this group.
The 18.31 in top height falls short of the BIG RED's 20.88 in, so a heavily lifted truck may still need blocks. Pick it for speed on a stock or mildly lifted F-150.
Big RED 4 Ton: Best for heavy loads
- 4 ton (8,000 lb) capacity
- 4 in to 20 in lift range
- Dual piston pump
- Wide stance
An 8,000 lb steel jack with a wide stance that holds steady under a loaded F-150.
Pros
- 8,000 lb capacity leaves big margin
- 20 in top height suits lifted trucks
- Wide stance for stability
Cons
- 100.8 lb is hard to carry
- More jack than a stock F-150 needs
The Big RED 4 Ton suits owners who tow or haul and want a big margin under a loaded truck. Its 8,000 lb capacity is twice what a stock F-150 corner carries, and the wide stance adds stability when the truck is loaded.
The dual piston pump lifts loads 5 times faster than a single pump, so you spend less time at the handle.
The range runs from 4 in to 20 in. That low start and tall top cover most F-150 ride heights.
The safety bypass prevents overloading, and it meets ASME standards. The powder-coated steel finish resists rust in a damp garage.
Two large casters and two swivel casters keep it rolling straight.
The trade-off is weight. At 100.8 lb this jack stays on the garage floor and takes two hands to move, and the body is 31.2 in long.
The 20 in top height sits just under the BIG RED 3 Ton's 20.88 in.
Pick it if you tow a trailer or run a lifted, loaded truck. Skip it if you want a jack you can carry to a friend's house or stash on a shelf.
Maxority 3 Ton Low Profile Floor Jack: Best for lowered or modified trucks
- 3 ton (6,600 lb) capacity
- Low-profile steel frame
- Rapid Pump technology
- Built-in safety valve
A steel low-profile jack for F-150s with aftermarket drops or low body kits, with a 19.9 in top height.
Pros
- Slides under low clearance
- Rapid Pump raises fast
- 19.9 in top height
Cons
- Random color shipped
- 90 day warranty is short
The Maxority 3 Ton suits F-150s with aftermarket drops, low body kits or air suspension set low. Its low-profile steel frame slides under low clearance, and the long reach helps you find the frame rail without dragging the jack.
That reach matters most when the truck sits close to the floor and you cannot raise the front end first.
The 3 ton (6,600 lb) capacity covers a corner weight with margin. Rapid Pump technology raises the saddle with fewer strokes, and the built-in safety valve stops overloading.
The top height reaches 19.9 in, so it still serves a lifted truck. The stable saddle holds the load without slipping while you work.
The color ships at random, so you cannot pick the finish. The 90 day warranty is the shortest in this group, well short of the 1 year terms on the ARCAN and BIG RED jacks.
The alloy steel body is durable but not light, so plan a floor spot for it.
Pick it for a modified or lowered F-150 where clearance is tight. Skip it if you want a long warranty or a specific color.
VEVOR 2.5 Ton Low Profile Heavy-Duty Steel: Best for tight storage
- 2.5 ton (5,500 lb) capacity
- 3.35 in to 14.96 in lift range
- Detachable two-piece handle
- Rubber saddle
A light, low steel jack whose handle comes apart so it stores on a garage shelf.
Pros
- Low 3.35 in start height
- Handle disassembles for storage
- Light at 13.6 kg
Cons
- 14.96 in top height is low for lifted trucks
- Single piston pump
The VEVOR 2.5 Ton suits a small garage where the jack lives on a shelf between jobs. Its two-piece handle comes apart for storage, and at 13.6 kg it is light enough to lift onto a hook.
The 31.5 in handle is long enough to give real leverage on the single piston pump.
It starts at 3.35 in, the lowest start height here, and reaches 14.96 in. That covers a stock F-150 tire change, though the top height leaves little room on a lifted truck.
A rubber saddle and foam handle bumper protect the truck's paint. The body measures 22.2 x 8.7 x 5.2 in, so it slides under the frame and stores flat.
The 360 degree saddle can be detached and replaced. VEVOR says the jack meets CE, UKCA and ASME PALD-2014 standards and has a built-in load safety system.
The 2.5 ton (5,500 lb) rating still covers a stock F-150 corner.
The 14.96 in top height is the main limit. Pick it if storage space is tight and your truck is stock.
Skip it if you run a lift kit or need to lift a wheel high off the ground.
AV Steel 3 Ton Single Piston Floor Jack: Best for standard pickups
- 3 ton (6,000 lb) capacity
- 5.5 in to 18.5 in lift range
- 360 degree rotating saddle
- Safety overload valve
A steel 3 ton jack built for standard pickup trucks, with an 18.5 in reach and a 12 month warranty.
Pros
- 18.5 in top height clears stock F-150s
- 12 month warranty
- 360 degree rotating saddle
Cons
- Single piston needs more strokes
- 63.8 lb is heavy to move
The AV Steel 3 Ton suits owners of standard pickup trucks who want a steel jack with a clear warranty. Its 6,000 lb capacity covers an F-150 corner with margin, and the range runs from 5.5 in to 18.5 in.
AV Steel lists it for cars, SUVs, minivans and standard pickup trucks.
The 18.5 in top height clears a stock F-150 frame and a mild lift. The large 360 degree rotating saddle centers the load, and two rear wheels let you roll it into place.
A built-in safety valve stops overloading, and AV Steel meets ANSI/ASME PASE standards. The manual notes that EVs need a jack point adapter and that the release valve must be fully closed before lifting.
AV Steel backs it with a 12 month warranty and around-the-clock support. The 63.8 lb weight means it stays near the truck rather than riding in the bed.
The single piston pump needs more strokes than the dual-piston jacks here. AV Steel also cautions that it is not for lifted vehicles or heavy-duty trucks.
Pick it for a standard or lightly lifted F-150. Skip it if you want fast lifting or plan to carry the jack in the truck.
ARCAN A20003 3 Ton Steel Low Profile Floor Jack: Best for long service life
- 3 ton (6,000 lb) capacity
- Low profile frame
- High carbon steel side plates
- Wiper seals
A steel low-profile jack with wiper seals and a reinforced chassis for buyers who want a long-wearing workshop tool.
Pros
- Wiper seals protect the hydraulic system
- High carbon steel side plates
- Wide front wheels for stability
Cons
- 76.8 lb needs two hands to move
- Starts at 7.5 in, the highest start height here
The ARCAN A20003 suits buyers who want a steel workshop jack built for demanding service. High carbon steel side plates reinforce the chassis, and wiper seals keep dirt and grit out of the hydraulic system.
The long handle gives leverage for controlled lifting and lowering, which matters when you are easing a truck down onto stands.
The 3 ton (6,000 lb) capacity covers an F-150 corner. The low profile frame slides under low-clearance vehicles, and wide front wheels with ball bearing rear casters improve stability and maneuverability.
Bypass and overload valves prevent over-extension and use beyond the rating. The body is 29.3 in long and weighs 76.8 lb.
ARCAN backs it with a 1 year warranty. Its start height is 7.5 in, which is the highest in this group and may not slide under a lowered F-150.
Pick it for driveway service where durability matters more than light weight. Skip it if you need a tall top height for a lifted truck or a jack you can carry easily.
How we picked the best floor jacks for an F-150
We compared capacity, lift range, weight, pump type and safety features against what an F-150 owner actually needs. Our score weighs specs, features and buyer feedback against what you're shopping for.
Every jack here had to clear at least 2 tons and fit under a stock truck frame. We also dropped any jack whose start height or top height made it useless for a typical F-150 job.
Matching capacity to the F-150 corner weight
A stock F-150 corner carries about 1,000 to 1,400 lb. A 2 ton (4,000 lb) jack covers that with margin, and every jack here except the DNA Motoring and the VEVOR clears 2.5 tons.
The VEVOR's 2.5 ton rating still covers the corner, but leaves less room for a loaded truck. The 4 ton Big RED doubles the corner weight, which helps when a trailer or a full bed sits on the rear axle.
The number on the label is a rating, not a target. Running a jack near its limit every time puts more strain on the seals and pump.
A 3 ton jack on a stock truck works well under its ceiling, which is one reason the bigger jacks hold up better in a busy driveway.
Lift height and start height for stock and lifted trucks
Start height decides whether the jack slides under the frame. Stock F-150s work with anything from 3.35 to 5.88 in.
Lifted trucks need a top height of 18 in or more, and the BIG RED's 20.88 in is the most forgiving here. The Maxority's 19.9 in and the Big RED 4 Ton's 20 in sit just behind it.
The VEVOR's 14.96 in top is fine for a wheel change but not for a lifted frame.
Check both numbers before you buy. A jack with a 3.35 in start and a 20 in top is the most flexible, but few jacks here offer both ends of that range.
The ARCAN Aluminum comes closest at 3.75 to 18 in.
Pump type, weight and long-term care
Dual-piston pumps raise the saddle in fewer strokes, which matters when you lift all four corners. The Jack Boss and Big RED 4 Ton use dual pumps, and the ARCAN 3-Ton Aluminum uses a quick-rise pump.
Single piston jacks like the AV Steel and VEVOR need more strokes but weigh less.
Weight decides whether the jack stays put or travels. Anything near 100 lb, like the Big RED 4 Ton, is a garage fixture.
The 36 lb BIG RED and the 13.6 kg VEVOR are the ones you can carry. A detachable handle, like the VEVOR's, also helps when shelf space is tight.
Safety features and warranty cover
Every jack here has an overload or bypass valve that stops the pump when the load passes the rating. Jack Boss and AV Steel meet ANSI/ASME PASE standards, and VEVOR lists CE, UKCA and ASME PALD-2014.
Warranty cover runs from 90 days on the Maxority to a full year on the ARCAN and BIG RED jacks. Wiper seals on the ARCAN A20003 protect the hydraulic system from dirt, which helps a jack stay in service.
No jack here should hold a truck up on its own. A floor jack lifts, and a jack stand holds.
Buy the stands at the same time as the jack so you are never tempted to skip them.
Which floor jack fits your F-150?
A stock F-150 owner can pick the DNA Motoring and stop there. A lifted truck owner should move up to the BIG RED 3 Ton or the ARCAN Aluminum for the extra reach.
A towing or heavy-hauling owner gets the most margin from the Big RED 4 Ton.
If you work on more than one vehicle, our 3 ton floor jack roundup covers the heavier picks. For a jack that also fits a car or SUV in a home garage, the home garage guide compares shared-use models.
A lowered or modified truck needs the low start height of a low profile floor jack. And if your driveway serves more than the pickup, the trucks and SUVs guide looks at the wider range.
| Product | Best for | Capacity | Lift range | Material | Our score |
|---|---|---|---|---|---|
| DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley | most F-150 owners | 2 tons | 5.1 to 13 in | Alloy steel | 9.7 |
| ARCAN 3-Ton Aluminum Low Profile Floor Jack | lifting height | 3 tons | 3.75 to 18 in | Aluminum | 9.2 |
| BIG RED Trolley Floor Jack with Extra Saddle | lifted trucks | 3 tons | 5.88 to 20.88 in | 9.0 | |
| Jack Boss 3 Ton Aluminum and Steel Racing Floor Jack | fast lifting | 3 tons | 3.94 to 18.31 in | Aluminum and steel | 8.8 |
| Big RED 4 Ton | heavy loads | 4 tons | 4 to 20 in | 8.6 | |
| Maxority 3 Ton Low Profile Floor Jack | lowered or modified trucks | 3 tons | Alloy steel | 8.2 | |
| VEVOR 2.5 Ton Low Profile Heavy-Duty Steel | tight storage | 2.5 tons | 3.35 to 14.96 in | 8.1 | |
| AV Steel 3 Ton Single Piston Floor Jack | standard pickups | 3 tons | 5.5 to 18.5 in | 8.1 | |
| ARCAN A20003 3 Ton Steel Low Profile Floor Jack | long service life | 3 tons | Steel | 8.0 |
The verdict
The DNA Motoring TOOLS-00234 is the best floor jack for most F-150 owners because it covers routine work on a stock truck at a light weight. Pick the BIG RED 3 Ton T83006 if your truck is lifted, and the ARCAN 3-Ton Aluminum if you want 18 in of reach without the heft of steel.
For a loaded or towing truck, the Big RED 4 Ton adds the margin and the wide stance. For a tight garage and a stock truck, the VEVOR's folding handle is the practical pick.
Buy a pair of jack stands with any jack here. A floor jack lifts only, and no jack in this group should hold a truck up while you work underneath it.
Our top 3 picks at a glance
-
1
Best for most F-150 owners
DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley
9.7/10 our score
See it on Amazon -
2
Best for lifting height
ARCAN 3-Ton Aluminum Low Profile Floor Jack
9.2/10 our score
See it on Amazon -
3
Best for lifted trucks
BIG RED Trolley Floor Jack with Extra Saddle
9.0/10 our score
See it on Amazon
Frequently asked questions
What capacity floor jack do I need for an F-150?
A 2 ton jack covers an F-150's front or rear corner, which carries roughly 1,000 to 1,400 lb on a stock truck. A 3 ton jack leaves more margin and lifts lifted or loaded trucks with less strain on the pump.
Will a low profile floor jack fit under an F-150?
Yes on a stock F-150. A jack that starts around 3.35 to 5.1 in slides under the frame and axle.
Lifted trucks with big tires need the extra reach of a jack like the BIG RED 3 Ton that tops out at 20.88 in.
Can I use a 2 ton floor jack on a lifted F-150?
Only if the jack reaches the lift point with room to spare. Most 2 ton trolleys stop around 13 to 15 in, so a lifted truck often needs a 3 ton jack with an 18 to 21 in top height.
How high should a floor jack lift an F-150?
Enough to get the tire off the ground plus a few inches for a jack stand. On a stock truck that usually means 15 to 17 in at the frame, so a jack rated to 18 in or more gives useful headroom.
Do I need jack stands with a floor jack?
Yes. A floor jack is for lifting only, and the DNA Motoring instructions say it must not hold a load for a long period.
Set jack stands under the frame before you go under the truck.
